Harmonie Kevlar Tail Cord

$10.00

Les Bois d’Harmonie flexible braided cord increases mobility of tailpiece closer to the bridge so as not to diminish the natural resonance of the cello.  It is the preferred tailcord for Harmonie tailpieces.  Length  ~ 16″

Category:

Related products

  • ConCarbo French Style Twill

    ConCarbo carbon fiber tailpieces are new to Cellos2Go, and are just resting on a cello for these pictures!   This is the French style, in twill which displays the CF weave.  The model with no fine tuners (not pictured)  is the least expensive ($135) and if you have Pegheds installed or use gut strings, this would be a good choice.   The model with mini-lever fine tuners ($159) requires threading the top of the string through a hole in the back of the tailpiece, then up to the peg.  The model with titanium fine tuners ($199) provides front access for string installation.  For more information from the maker, visit their site here.

    $135.00

  • Composite Fitting for 10mm Endpin (NHM)

    This New Harmony Music endpin fitting is composite with stainless steel and can be used with your existing 10 mm endpin, or you can purchase one of our options.   Keep in mind there are tolerances so a misfit (while rare) is possible.  You will need to know the diameter of the hole in your cello from the current fitting so you can choose either the Small 23.5 mm, Medium 25.5 mm, or Large 27.5 mm.   This is a traditional straight bore hole.  The 6-degree angled model is listed separately.

    $80.00

  • 10 mm Hollow Carbon Fiber Endpin (NHM)

    New Harmony Music’s woven carbon fiber endpin is 10mm diameter with hollow center, 24″ long, extremely sharp heat-hardened steel tip which can be resharpened.  The CF weave is visible for a distinctive look, and it’s light at ~43g. If you don’t have calipers to measure the diameter, you can measure around the circumference.  If it’s 1.25″ you have a 10mm endpin.  Each endpin is sold with a plastic-lined rubber cap.  Replacement caps may be purchased separately.      20″ long  endpin can be ordered, $73.00

    $84.00

  • 8 mm Solid Carbon Fiber Endpin NHM

    New Harmony’s 8mm carbon fiber endpin is 20″ long, weighs ~ 42 grams with a rubber cap that weighs 6 grams.  It is a one-for-one replacement for most solid metal endpins.  If you don’t have calipers to measure diameter of your existing endpin, measure around the circumference of the rod.  If it’s 1″, the diameter is 8mm.    The tip is heat-hardened steel that can be sharpened, though it maintains its original point for a long time.  Some players report some flex compared to solid metal rods, but this varies with player movement (emoting) as well as how close you are to full extension.  *Add $10 for the model with a steel carbide tip

    $58.50