Wittner Ultra Tailpiece

$28.00

Wittner composite tailpiece has integrated fine tuners and comes with a tail cord. Changing strings is easy because the parts you need to thread are on the front of the tailpiece.  An excellent replacement for old ebony tailpieces with bulky add-on fine tuners.  Tailpiece for 7/8 and 4/4 size cellos is 235 mm in length.  Fractional sizes can be ordered.

Category:

Related products

  • Composite Fitting 6 degree angle bore for 10mm Endpin (NHM)

    Endpin fitting is composite/stainless with thumb screw that tightens a collar around the endpin.   Cone diameter only comes in 27.5mm to accommodate the angle of the hole for a 10mm rod.  This allows use of a straight rod, angled downward 6 degrees.  Not as severe as the Stahlhammer’s 25 degrees.  Your cello sits more horizontal, f-holes facing more upward, and also may make the pegs sit more comfortably in relation to your neck.   Price is for the fitting only.  You can use any 10mm rod, or purchase the NHM 10mm rod (listed separately).

    $85.00

  • Stringvision Posture Pegs

    Posture Pegs from Stringvision afford freedom of movement by eliminating the protruding peg heads. Tuning is accomplished by means of a removable key with grip. The peg shank is a blackwood blank, tapering from 14mm at the collar to 12.5 mm at the small end, 6.3 cm in length.  It must be shaped and fit by a luthier to the existing peg hole.  Set of 2 pegs includes two shanks and two keys.  *The steel sleeve is 2 cm long, so if you want to use these pegs in a fractional cello, make sure the peg diameter is thick enough so as not to interfere.

    $150.00

  • Composite Fitting for 8 mm endpin (NHM)

    This New Harmony Music endpin fitting is composite with stainless steel and can be used with your existing 8mm endpin, or you can purchase one of our options.   Keep in mind there are tolerances so a misfit (while rare) is possible.  You will need to know the diameter of the hole in your cello from the current fitting so you can choose either the Small 23.5 mm, Medium 25.5 mm, or Large 27.5 mm.   There is no angled bore option for an 8mm endpin.

    $67.00

  • 10 mm Cube Acoustics endpin

    The Cube Acoustics 10mm tuned alloy endpin weighs ~386g, is 23.5″ long.   The extra length allows for more rod resonating in the cello. Variations in height of cellist, body length and contours of cello yield different results in sound.  As far as the tonal enhancements you will experience, you simply have to try it and gauge its performance for yourself.  The endpin will tarnish from brass tone over time and it can be left to a natural brown patina.

    $450.00