Stringvision Posture Peg Replacement Key
$25.00
Replacement key for Posture Peg
Related products
-
Angled Fitting w/ 10mm Endpin NHM
This set from New Harmony Music includes a composite fitting and a solid 10mm carbon fiber rod, 20″ long. It is very stable when extended. The hole in the fitting is bored at a 6-degree angle, so your cello will sit slightly more horizontal. Cellists who have tried instruments with this setup find it very comfortable. The diameter on the composite fitting is 27.5 mm. The tip on this endpin is heat-hardened steel and can be resharpened.
-
ConCarbo French Style Twill
ConCarbo carbon fiber tailpieces are new to Cellos2Go, and are just resting on a cello for these pictures! This is the French style, in twill which displays the CF weave. The model with no fine tuners (not pictured) is the least expensive ($135) and if you have Pegheds installed or use gut strings, this would be a good choice. The model with mini-lever fine tuners ($159) requires threading the top of the string through a hole in the back of the tailpiece, then up to the peg. The model with titanium fine tuners ($199) provides front access for string installation. For more information from the maker, visit their site here.
-
10 mm Cube Acoustics endpin
The Cube Acoustics 10mm tuned alloy endpin weighs ~386g, is 23.5″ long. The extra length allows for more rod resonating in the cello. Variations in height of cellist, body length and contours of cello yield different results in sound. As far as the tonal enhancements you will experience, you simply have to try it and gauge its performance for yourself. The endpin will tarnishfrom brass tone over time and it can be left to a natural brown patina. If you want to polish it, recommended is 0000 steel wool, brass or silver polish. If your current fitting does not fit a 10mm rod, we offer New Harmony Music fittings in both straight bore and 6-degree angle.
-
Stahlhammer Endpin – CF
The Stahlhammer carbon fiber “bent” endpin consists of a cone 27mm at the widest point which can be cut anywhere along the taper to accommodate a hole as small as 23mm. There are two telescoping rods. Loosen the thumb screw and slide out the first rod which will rotate 25 degrees or lock in the straight position. Then twist the collar to release the second rod and extend to playing length. We stock medium 10.5 – 18.5″ but can order the Short 9-14.5″ Long 11.75-20.5″. *Note: Do not overtighten or the internal nylon locking sleeve may split, requiring replacement. Read the instructions on the box!!!!
FAQ
Orders are placed by phone (518-527-5789) or (email).
Once we know what you want and where it has to be shipped, we’ll check stock, clarify any questions you may have, and give you shipping options, transit times and costs.
Learn more about placing an order or visiting our showroom here.