10 mm Titanium Memminger endpin
$200.00
The Memminger hollow titanium endpin has five sets of 4 holes that spiral around the endpin every 90 degrees, about 1″ apart. Length 23.5″, weight ~ 92 grams.
Related products
-
10 mm Solid Carbon Fiber Endpin (NHM)
New Harmony Music’s solid 10 mm CF endpin has an extremely sharp heat-hardened steel tip which can be resharpened. If you don’t have calipers to measure the diameter of your current endpin, you can measure around the circumference. If it’s 1.25″ you have a 10 mm endpin. Each endpin is sold with a (replaceable) plastic-lined rubber cap. While the standard endpin length is 20″, some cellists are finding that more endpin resonating inside their cello improves the sound. Results always vary, so we can’t tell you what will happen, only that we can give you the opportunity to try and find out.
20″ endpin $63.00
24″ endpin $73.50
28″ endpin $84.00 -
Angled Fitting w/ 10mm Endpin NHM
This set from New Harmony Music includes a composite fitting and a solid 10mm carbon fiber rod, 20″ long. It is very stable when extended. The hole in the fitting is bored at a 6-degree angle, so your cello will sit slightly more horizontal. Cellists who have tried instruments with this setup find it very comfortable. The diameter on the composite fitting is 27.5 mm. The tip on this endpin is heat-hardened steel and can be resharpened.
-
Composite Fitting for 10mm Endpin (NHM)
This New Harmony Music endpin fitting is composite with stainless steel and can be used with your existing 10 mm endpin, or you can purchase one of our options. Keep in mind there are tolerances so a misfit (while rare) is possible. You will need to know the diameter of the hole in your cello from the current fitting so you can choose either the Small 23.5 mm, Medium 25.5 mm, or Large 27.5 mm. This is a traditional straight bore hole. The 6-degree angled model is listed separately.
-
10 mm Carbon Fiber Endpin Set (NHM)
New Harmony Music 10mm solid carbon fiber endpin is 20″ long and comes with a composite fitting with a standard straight bore. Fittings are available in three diameters: Small 23.5 mm, Medium 25.5 mm, Large 27.5 mm. The endpin tip is made of heat-hardened steel and can be re-sharpened if necessary. Longer endpins are available with a surcharge.
Set with 24″ solid CF endpin is $123.00
Set with 28″ solid CF endpin is $133.50 *may not fit in short-pattern cellos
FAQ
Orders are placed by phone (518-527-5789) or (email).
Once we know what you want and where it has to be shipped, we’ll check stock, clarify any questions you may have, and give you shipping options, transit times and costs.
Learn more about placing an order or visiting our showroom here.