French style tailpiece made from high-quality ebony, 235 mm long with integrated composite fine tuners. Kevlar tail cord is available but not included because not everyone chooses this option.
** Read to the end – new update. If you have overtightened the telescoping rod so it no longer holds, you have split the interior tightening mechanism. This is a nylon sleeve and is replaceable. Unscrew the extension rod and remove, take the tightening lock off, and gently screw the new one on. Do not overtighten when you adjust your endpin next time. Just enough to hold. ***If you read the instructions inside the box, specifically No. 8, it suggests you routinely remove the inner tube and apply a few drops of alcohol to the nylon sleeve. Apparently nylon off-gases, and produces a film which may act as a lubricant. So even if you have not put oil in the mechanism, you still need to clean this part. According to Semmy Stahlhammer, the nylon piece is strong and should not need to be replaced IF PROPERLY MAINTAINED.
The Stahlhammer carbon fiber “bent” endpin consists of a fitting (27mm cone), and 2 telescoping rods. Loosen the thumb screw and slide out the first rod which will rotate 25 degrees or lock in the straight position. Then twist the collar to release the second rod and extend to playing length. We stock medium 10.5 – 18.5″ but can order the Short 9-14.5″ Long 11.75-20.5″. *Note: Do not overtighten or the internal nylon locking sleeve may split, requiring replacement. Read the instructions on the box!!!!
Package of 10 folded Celloflowers note cards designed by Andrea DiCocco, with envelopes. The originals were 6″ x 4″ but we now offer Small ( 5 1/2″x 4 1/4″) and Large ( 7″ x 5″). If you’re not sure which size you want, you can get some of each to equal 10. For thank-you notes, small is great. For newsy catching-up, the large!
Posture Pegs from Stringvision afford freedom of movement by eliminating the protruding peg heads. Tuning is accomplished by means of a removable key with grip. The peg shank is a blackwood blank, tapering from 14mm at the collar to 12.5 mm at the small end, 6.3 cm in length. It must be shaped and fit by a luthier to the existing peg hole. Set of 2 pegs includes two shanks and two keys. *The steel sleeve is 2 cm long, so if you want to use these pegs in a fractional cello, make sure the peg diameter is thick enough so as not to interfere.
$150.00
FAQ
Orders are placed by phone (518-527-5789) or (email).
Once we know what you want and where it has to be shipped, we’ll check stock, clarify any questions you may have, and give you shipping options, transit times and costs.
