Harmonie Kevlar Tail Cord

Harmonie Kevlar Tail Cord

$10.00

Les Bois d’Harmonie flexible braided cord increases mobility of tailpiece closer to the bridge so as not to diminish the natural resonance of the cello.  It is the preferred tailcord for Harmonie tailpieces.  Length  ~ 16″

Category:

Related products

  • Composite Fitting 6 degree angle bore for 10mm Endpin (NHM)

    Composite Fitting 6 degree angle bore for 10mm Endpin (NHM)

    Endpin fitting is composite/stainless with thumb screw that tightens a collar around the endpin.   Cone diameter only comes in 27.5mm to accommodate the angle of the hole for a 10mm rod.  This allows use of a straight rod, angled downward 6 degrees.  Not as severe as the Stahlhammer’s 25 degrees.  Your cello sits more horizontal, f-holes facing more upward, and also may make the pegs sit more comfortably in relation to your neck.   Price is for the fitting only.  You can use any 10mm rod, or purchase the NHM 10mm rod (listed separately).

    $85.00
  • TekPin Professional Stainless Endpin

    TekPin Professional Stainless Endpin

    TekPin Professional features the elegant rosewood fitting and combination of stainless with a carbide rod.   (Endpin mass is ~ 100 g)
    Please visit the maker’s site for the best explanation of this unique endpin and see it s vertical advantage in action.  https://tekpinusa.com

    $800.00
  • Akusticus Tailpiece

    Akusticus Tailpiece

    Akusticus plastic tailpiece,  220 mm in length, has integrated fine tuners and a wire tail loop.  This is a popular choice for fine instruments as it can help enhance volume and tone.  Weight ~ 81.8g.  There are replacement parts for this tailpiece so if you break a fine tuner, don’t throw the tailpiece away!

    $48.00
  • 8 mm Solid Carbon Fiber Endpin NHM

    8 mm Solid Carbon Fiber Endpin NHM

    New Harmony’s 8mm carbon fiber endpin is 20″ long, weighs ~ 42 grams with a rubber cap that weighs 6 grams.  It is a one-for-one replacement for most solid metal endpins.  If you don’t have calipers to measure diameter of your existing endpin, measure around the circumference of the rod.  If it’s 1″, the diameter is 8mm.    The tip is heat-hardened steel that can be sharpened, though it maintains its original point for a long time.  Some players report some flex compared to solid metal rods, but this varies with player movement (emoting) as well as how close you are to full extension.  *Add $10 for the model with a steel carbide tip

    $58.50