This New Harmony Music endpin fitting is composite with stainless steel and can be used with your existing 8mm endpin, or you can purchase one of our options. Keep in mind there are tolerances so a misfit (while rare) is possible. You will need to know the diameter of the hole in your cello from the current fitting so you can choose either the Small 23.5 mm, Medium 25.5 mm, or Large 27.5 mm. There is no angled bore option for an 8mm endpin.
Les Bois d’Harmonie flexible braided cord increases mobility of tailpiece closer to the bridge so as not to diminish the natural resonance of the cello. It is the preferred tailcord for Harmonie tailpieces. Length ~ 16″
Endpin fitting is composite/stainless with thumb screw that tightens a collar around the endpin. Cone diameter only comes in 27.5mm to accommodate the angle of the hole for a 10mm rod. This allows use of a straight rod, angled downward 6 degrees. Not as severe as the Stahlhammer’s 25 degrees. Your cello sits more horizontal, f-holes facing more upward, and also may make the pegs sit more comfortably in relation to your neck. Price is for the fitting only. You can use any 10mm rod, or purchase the NHM 10mm rod (listed separately).
The Cube Acoustics 10mm tuned alloy endpin weighs ~386g, is 23.5″ long. The extra length allows for more rod resonating in the cello. Variations in height of cellist, body length and contours of cello yield different results in sound. As far as the tonal enhancements you will experience, you simply have to try it and gauge its performance for yourself. The endpin will tarnish from brass tone over time and it can be left to a natural brown patina.
$450.00
FAQ
Orders are placed by phone (518-527-5789) or (email).
Once we know what you want and where it has to be shipped, we’ll check stock, clarify any questions you may have, and give you shipping options, transit times and costs.
