ConCarbo French Style Twill

$135.00

ConCarbo carbon fiber tailpieces are new to Cellos2Go, and are just resting on a cello for these pictures!   This is the French style, in twill which displays the CF weave.  The model with no fine tuners (not pictured)  is the least expensive ($135) and if you have Pegheds installed or use gut strings, this would be a good choice.   The model with mini-lever fine tuners ($159) requires threading the top of the string through a hole in the back of the tailpiece, then up to the peg.  The model with titanium fine tuners ($199) provides front access for string installation.  For more information from the maker, visit their site here.

Category:

Related products

  • Angled Fitting for 10mm Endpin (NHM)

    Endpin fitting is composite/stainless with thumb screw. Cone diameter only comes in 27.5mm to accommodate the angle of the hole for a 10mm rod.  This allows use of a straight rod,angled downward 6 degrees.  Not as severe as the Stahlhammer’s 25 degrees.  Your cello sits more horizontal, f-holes facing more upward, and also may make the pegs sit more comfortably in relation to your neck.   Price is for the fitting only.  You can use any 10mm rod, or purchase the NHM 10mm rod (listed separately).

    $70.50

  • Angled Fitting w/ 10mm Endpin NHM

    This set from New Harmony Music  includes a composite fitting and a solid 10mm carbon fiber rod, 20″ long.  It is very stable when extended.  The hole in the fitting is bored at a 6-degree angle, so your cello will sit slightly more horizontal.  Cellists who have tried instruments with this setup find it very comfortable.  The diameter on the composite fitting is 27.5 mm.  The tip on this endpin is heat-hardened steel and can be resharpened.

    $120.00

  • 10 mm Titanium Memminger endpin

    The Memminger hollow titanium endpin has five sets of 4 holes that spiral around the endpin every 90 degrees, about 1″ apart.    Length 23.5″, weight ~ 92 grams.

     

    $200.00

  • 10 mm Cube Acoustics endpin

    The Cube Acoustics 10mm tuned alloy endpin weighs ~386g, is 23.5″ long.   The extra length allows for more rod resonating in the cello. Variations in height of cellist, body length and contours of cello yield different results in sound.  As far as the tonal enhancements you will experience, you simply have to try it and gauge its performance for yourself.  The endpin will tarnishfrom brass tone over time and it can be left to a natural brown patina.  If you want to polish it, recommended is 0000 steel wool, brass or silver polish.  If your current fitting does not fit a 10mm rod, we offer New Harmony Music fittings in both straight bore and 6-degree angle.

    $450.00