Composite Fitting for 10mm Endpin (NHM)

$67.50

This New Harmony Music endpin fitting is composite with stainless steel and can be used with your existing 10 mm endpin, or you can purchase one of our options.   Keep in mind there are tolerances so a misfit (while rare) is possible.  You will need to know the diameter of the hole in your cello from the current fitting so you can choose either the Small 23.5 mm, Medium 25.5 mm, or Large 27.5 mm.   This is a traditional straight bore hole.  The 6-degree angled model is listed separately.

Category:

Related products

  • Stahlhammer Endpin – CF

    The Stahlhammer carbon fiber “bent” endpin consists of a cone 27mm at the widest point which can be cut anywhere along the taper to accommodate a hole as small as 23mm.  There are two telescoping rods.  Loosen the thumb screw and slide out the first rod which will rotate 25 degrees or lock in the straight position.  Then twist the collar to release the second rod and extend to playing length.  We stock medium  10.5 – 18.5″ but can order the Short 9-14.5″ Long 11.75-20.5″.   *Note:  Do not overtighten or the internal nylon locking sleeve may split, requiring replacement.   Read the instructions on the box!!!!

    $275.00

  • Angled Fitting w/ 10mm Endpin NHM

    This set from New Harmony Music  includes a composite fitting and a solid 10mm carbon fiber rod, 20″ long.  It is very stable when extended.  The hole in the fitting is bored at a 6-degree angle, so your cello will sit slightly more horizontal.  Cellists who have tried instruments with this setup find it very comfortable.  The diameter on the composite fitting is 27.5 mm.  The tip on this endpin is heat-hardened steel and can be resharpened.

    $120.00

  • 10 mm Carbon Fiber Endpin Set (NHM)

    New Harmony Music 10mm solid carbon fiber endpin is 20″ long and comes with a composite fitting with a standard straight bore.  Fittings are available in three diameters: Small 23.5 mm, Medium 25.5 mm, Large 27.5 mm.   The endpin tip is made of heat-hardened steel and can be re-sharpened if necessary.  Longer endpins are available with a surcharge.

    Set with 24″ solid CF endpin is $123.00
    Set with 28″ solid CF endpin is $133.50  *may not fit in short-pattern cellos

    $112.50

  • Harmonie Kevlar Tail Cord

    Les Bois d’Harmonie flexible braided cord increases mobility of tailpiece closer to the bridge so as not to diminish the natural resonance of the cello.  It is the preferred tailcord for Harmonie tailpieces.  Length  ~ 16″

    $10.00