ConCarbo Harp style with Titanium fine tuners

ConCarbo Harp style with Titanium fine tuners

$274.00

Pictured is the matte black version of the ConCarbo harp tailpiece with Titanium adjusters, weight 39.8 g.  It is also available in the Twill, but not in stock until our next order.   While many traditional tailpieces have a length of 235 mm, this is 230 mm on the longest side and 218 on the shortest.

Category:

Related products

  • 8 mm Cube Acoustics endpin

    8 mm Cube Acoustics endpin

    Cube Acoustics 8mm endpin is made of a patent-pending special alloy.  Weight is ~ 246 g, length is 23.5″.  The extra length allows for more rod resonating in the cello.  Of course this varies with height of cellist, body length and contours of cello, so results should vary.  As far as the tonal enhancements you will experience, you simply have to try it and gauge its performance for yourself.  The endpin will tarnish over time and it can be left to a natural brown patina.  If you want to polish it, recommended is 0000 steel wool, or brass/silver polish.

    $450.00
  • 8 mm Carbon Fiber Endpin Set NHM

    8 mm Carbon Fiber Endpin Set NHM

    The 8mm NHM endpin is solid carbon fiber with a heat-hardened steel tip, 20″ long and comes with the matching composite fitting which tightens with a collar rather than putting pressure of a screw tip against the rod.  Fittings are available in 27.5 and 25.5mm so you need to know the size the opening in your cello when placing your order.  Protective rubber cap for the extremely sharp tip is included and extras may be purchased.

    $109.00
  • Composite Fitting 6 degree angle bore for 10mm Endpin (NHM)

    Composite Fitting 6 degree angle bore for 10mm Endpin (NHM)

    Endpin fitting is composite/stainless with thumb screw that tightens a collar around the endpin.   Cone diameter only comes in 27.5mm to accommodate the angle of the hole for a 10mm rod.  This allows use of a straight rod, angled downward 6 degrees.  Not as severe as the Stahlhammer’s 25 degrees.  Your cello sits more horizontal, f-holes facing more upward, and also may make the pegs sit more comfortably in relation to your neck.   Price is for the fitting only.  You can use any 10mm rod, or purchase the NHM 10mm rod (listed separately).

    $85.00
  • 10 mm Solid Carbon Fiber Endpin (NHM)

    10 mm Solid Carbon Fiber Endpin (NHM)

    New Harmony Music’s solid 10 mm CF endpin  has an extremely sharp heat-hardened steel tip which can be resharpened.   If you don’t have calipers to measure the diameter of your current endpin, you can measure around the circumference.  If it’s 1.25″ you have a 10 mm endpin.  Each endpin is sold with a (replaceable)  plastic-lined rubber cap.  While the standard endpin length is 20″, some cellists are finding that more endpin resonating inside their cello improves the sound.  Results always vary, so we can’t tell you what will happen, only that we can give you the opportunity to try and find out.
    20″ endpin  $63.00
    24″ endpin  $76.00
    28″ endpin  $84.00

    $63.00