Bam Newtech

Related products

• 

  Fiedler bow holder with tip pocket

  Fiedler makes a bow holder with a magnetic closure, sticky-back foam block, bow tip pocket, and mounting screws (though users we talked to just used hot glue).   If you wish to add a third bow in the lid that will parallel the fingerboard, this should have the space you need.   Keeping in mind case makers do not all use the same materials nor have the same dimensions or shell thicknesses, results may vary.  If you are unhappy with your current velcro/snap/zip holders, you can replace them with the Fiedler.

   

  $33.00
• Sale!
  

  Bam Shamrock with wheels

  Shamrock is part of the HighTech series, and an excellent choice for a ~ 10 lb, protective case with wheels!  It has a 3-ply ABS shell over a foam core, but generic instead of Airex foam as in the other HT models. The scratch-resistant lids come in 4 colors with textured black backs.   Only the black is completely textured.  Injected high-density foam pads are broad, and support the strongest parts of the cello at the neck and bottom blocks. Standard 2 bow holders, string pocket, shoulder straps. Rigid when standing, aligns and closes easily with 5 latches. The interior is generous 37cm UB, 45cm LB, body length 80cm, total length 125cm but fit issues may occur at the center bouts and the C peg due to the tapering of the case.  Weight with wheels and exterior pull handle is ~ 10 lbs.  Pair of neoprene, very comfy shoulder straps included.   1 Orangey in stock at this price

  $1,569.00 Original price was: $1,569.00.$1,350.00Current price is: $1,350.00.
• 

  Vivo Hybrid case with wheels

  Hybrid cello case with wheels weighs 10.2 pounds; shoulder straps add .8 lb.   Shell is textured,  and is shown in Silver and Champagne.  There are 7 overcam latches, none lock.  Neck strap is velcro, scroll loop has an adustable clasp, and bow holders have zip closures. An accessory pocket is in the lid opposite the scroll.  The upper suspension pad supports the neck block, and is on a velcro track so if your cello is long or short, you can adjust the pad.  The lower pads are fixed, suspend under the bottom block, and curve up the lower sides so there are no additional pads required.  Pictured is a 7/8ths cello with dimensions provided, and you can see the fit is fine with no C peg issue.   The largest cello we fit had Back length 763, UB 365 and LB 460 but the widest part is toward the bottom of the cello, so curvature matters.  Two shoulder straps attach to 2 D-rings on the upper back, connecting to D ring at the each lower bout.   In stock:  Blue, Red, and not pictures yet Champagne and Teal Blue.  Teal is a new color, and also features a neck clasp instead of Velcro strap.

  $680.00
• 

  Bam Classic with wheels

  Bam’s Classic is their most affordable case, having a 1-ply ABS shell compared to their higher-end models with multi-ply shells.   The interior dense, broad padding suspends the cello under its strongest structural  parts: the neck and bottom blocks.  Cellists concerned about wheeling their case will appreciate the material of the wheels and their spacing, as well as the protection the suspension pads provide from vibration and impact.  The Classic features an internal music pocket, but common sense dictates what will fit without interfering with the back of your instrument.  The hardware, carabiners and shoulder straps are top quality, and comfortable whether wearing a tank top or coat.  This case has a generous interior and comfortably fits this cello with back length 30″, upper bouts 14 3/8″, lower bouts 17 5/8″,  Total length from top of scroll to bottom edge 48 1/2″ plus  2 1/4″ for the endpin well.   Weight 13 pounds.

  $960.00