New Harmony Rubber Tip

$10.00

Rubber tip with plastic liner specifically designed to fit New Harmony heat-hardened steel endpin tips.   The diameter of the hole is about 9 mm, so it stretches to fit securely over either the 10 mm diameter rod, or the 8mm rod because it reaches over the collar which is 9.5 mm.   Package of 2.  See photos for a clearer understanding of why it might not fit on your non-NHM endpin.

Category:

Related products

  • Akusticus Tailpiece

    Akusticus plastic tailpiece,  220 mm in length, has integrated fine tuners and a wire tail loop.  This is a popular choice for fine instruments as it can help enhance volume and tone.  Weight ~ 81.8g.  There are replacement parts for this tailpiece so if you break a fine tuner, don’t throw the tailpiece away!

    $48.00

  • 10 mm Cube Acoustics endpin

    The Cube Acoustics 10mm tuned alloy endpin weighs ~386g, is 23.5″ long.   The extra length allows for more rod resonating in the cello. Variations in height of cellist, body length and contours of cello yield different results in sound.  As far as the tonal enhancements you will experience, you simply have to try it and gauge its performance for yourself.  The endpin will tarnishfrom brass tone over time and it can be left to a natural brown patina.  If you want to polish it, recommended is 0000 steel wool, brass or silver polish.  If your current fitting does not fit a 10mm rod, we offer New Harmony Music fittings in both straight bore and 6-degree angle.

    $450.00

  • 8 mm Carbon Fiber Endpin Set NHM

    The 8mm NHM endpin is solid carbon fiber with a heat-hardened steel tip, 20″ long and comes with the matching composite fitting which tightens with a collar rather than putting pressure of a screw tip against the rod.  Fittings are available in 27.5 and 25.5mm so you need to know the size the opening in your cello when placing your order.  Protective rubber cap for the extremely sharp tip is included and extras may be purchased.

    $109.00

  • Pegheds (offered here only in our cellos)

    PegHeds are the original geared pegs, and are made in Winnsboro, SC by Chuck Herin.  Once installed, all you need is a thumb and index finger to tune and the peg stays put.  When humid summer weather causes friction pegs to swell and stick, or dry winter air causes shrinking and slippage, Pegheds  will hold firmly.  Prices vary with wood variety and style.  Pegs must be ordered to fit your specific cello, or you may be able to have your own pegs retrofit in some instances.  Nearly every cello here has Pegheds installed, and we highly recommend them.  If you are wishing you could use a Posture Peg, please note the stubby C peg available, which is pictured in the product gallery.  We no longer sell sets of PegHeds here, but do have them installed in cellos we sell.  We love to promote and explain them.  Go to PegHeds official website to order.