Cello Parts
Showing 25–32 of 32 results
-
New Harmony Rubber Tip
Rubber tip with plastic liner specifically designed to fit New Harmony heat-hardened steel endpin tips. The diameter of the hole is about 9 mm, so it stretches to fit securely over either the 10 mm diameter rod, or the 8mm rod because it reaches over the collar which is 9.5 mm. Package of 2. See photos for a clearer understanding of why it might not fit on your non-NHM endpin.
-
Stahlhammer replacement tightener
** Read to the end – new update. If you have overtightened the telescoping rod so it no longer holds, you have split the interior tightening mechanism. This is a nylon sleeve and is replaceable. Unscrew the extension rod and remove, take the tightening lock off, and gently screw the new one on. Do not overtighten when you adjust your endpin next time. Just enough to hold. ***If you read the instructions inside the box, specifically No. 8, it suggests you routinely remove the inner tube and apply a few drops of alcohol to the nylon sleeve. Apparently nylon off-gases, and produces a film which may act as a lubricant. So even if you have not put oil in the mechanism, you still need to clean this part. According to Semmy Stahlhammer, the nylon piece is strong and should not need to be replaced IF PROPERLY MAINTAINED.
-
Akusticus Tailpiece
Akusticus plastic tailpiece, 220 mm in length, has integrated fine tuners and a wire tail loop. This is a popular choice for fine instruments as it can help enhance volume and tone. Weight ~ 81.8g. There are replacement parts for this tailpiece so if you break a fine tuner, don’t throw the tailpiece away!
-
Wittner Ultra Tailpiece
Wittner composite tailpiece has integrated fine tuners and comes with a tail cord. Changing strings is easy because the parts you need to thread are on the front of the tailpiece. An excellent replacement for old ebony tailpieces with bulky add-on fine tuners. Tailpiece for 7/8 and 4/4 size cellos is 235 mm in length. Fractional sizes can be ordered.
-
Frirsz Alloy Tailpiece
The original Frirsz cello tailpiece is made of alloy and enhances projection, balance and response. Wolf tones are tremendously reduced if not eliminated. Asymmetry allows for a longer vibrating C string. The cut-away design lightens the tailpiece and opens up the sound of the cello. Integrated fine tuners are modular, removable, and interchangeable with traditional “keyhole” type of string attachment inserts, so it can be configured to your preferred set-up if you use gut strings or have PegHeds. Please let us know if you want both the fine tuner modules and keyhole modules.
-
Harmonie Kevlar Tail Cord
Les Bois d’Harmonie flexible braided cord increases mobility of tailpiece closer to the bridge so as not to diminish the natural resonance of the cello. It is the preferred tailcord for Harmonie tailpieces. Length ~ 16″
-
Wittner Tail Cord
Sacconi style nylon tail cord for 4/4 and 7/8 cellos has brass threaded caps on either end for installation and adjustment
-
Self-Adjusting Bridge – Aubert
Adjustable bridges are not ideal for setting up a cello, but they can be a lifesaver in an emergency when there is no luthier or repair person close by. These bridges are available in 4/4 and fractional sizes, but not a range of diameters. They have pivoting feet since cello tops vary in curvature. That means you will be able to set your cello up, but it is not likely the bridge will be optimal in relation to your sound post and bass bar. They are available in low, medium and high so you can try to get a suitable height for playing. Handy to have available at summer music camps or if you travel.
FAQ
Orders are placed by phone (518-527-5789) or (email).
Once we know what you want and where it has to be shipped, we’ll check stock, clarify any questions you may have, and give you shipping options, transit times and costs.
Learn more about placing an order or visiting our showroom here.