Angled Fitting w/ 10mm Endpin NHM

$120.00

This set from New Harmony Music  includes a composite fitting and a solid 10mm carbon fiber rod, 20″ long.  It is very stable when extended.  The hole in the fitting is bored at a 6-degree angle, so your cello will sit slightly more horizontal.  Cellists who have tried instruments with this setup find it very comfortable.  The diameter on the composite fitting is 27.5 mm.  The tip on this endpin is heat-hardened steel and can be resharpened.

Category:

Related products

  • 8 mm Carbon Fiber Endpin Set NHM

    The 8mm NHM endpin is solid carbon fiber with a heat-hardened steel tip, 20″ long and comes with the matching composite fitting which tightens with a collar rather than putting pressure of a screw tip against the rod.  Fittings are available in 27.5 and 25.5mm so you need to know the size the opening in your cello when placing your order.  Protective rubber cap for the extremely sharp tip is included and extras may be purchased.

    $109.00

  • ConCarbo Harp style

    This Harp style is pictured in the Unidirectional CF and does not have fine tuners.  If you have Pegheds or other geared pegs, you don’t need additional tuners.  For regular friction pegs, you can order this model with Titanium or mini-lever fine tuners which are pictured on the ConCarbo French style entry on the site, and are priced differently.    These tailpieces are new here, and we don’t have all their options sitting here.  This model is also available in the Twill or Painted.  These items can be seen on the maker’s site for now.

    $155.00

  • Stahlhammer Endpin – CF

    The Stahlhammer carbon fiber “bent” endpin consists of a cone 27mm at the widest point which can be cut anywhere along the taper to accommodate a hole as small as 23mm.  There are two telescoping rods.  Loosen the thumb screw and slide out the first rod which will rotate 25 degrees or lock in the straight position.  Then twist the collar to release the second rod and extend to playing length.  We stock medium  10.5 – 18.5″ but can order the Short 9-14.5″ Long 11.75-20.5″.   *Note:  Do not overtighten or the internal nylon locking sleeve may split, requiring replacement.   Read the instructions on the box!!!!

    $275.00

  • Self-Adjusting Bridge – Aubert

    Adjustable bridges are not ideal for setting up a cello, but they can be a lifesaver in an emergency when there is no luthier or repair person close by.  These bridges are available in 4/4 and fractional sizes, but not a range of diameters.  They have pivoting feet since cello tops vary in curvature.  That means you will be able to set your cello up, but it is not likely the bridge will be optimal in relation to your sound post and bass bar.  They are available in low, medium and high so you can try to get a suitable height for playing.  Handy to have available at summer music camps or if you travel.

    $75.00