Composite Fitting for 8 mm endpin (NHM)

$67.00

This New Harmony Music endpin fitting is composite with stainless steel and can be used with your existing 8mm endpin, or you can purchase one of our options.   Keep in mind there are tolerances so a misfit (while rare) is possible.  You will need to know the diameter of the hole in your cello from the current fitting so you can choose either the Small 23.5 mm, Medium 25.5 mm, or Large 27.5 mm.   There is no angled bore option for an 8mm endpin.

Category:

Related products

  • 10 mm Cube Acoustics endpin

    The Cube Acoustics 10mm tuned alloy endpin weighs ~386g, is 23.5″ long.   The extra length allows for more rod resonating in the cello. Variations in height of cellist, body length and contours of cello yield different results in sound.  As far as the tonal enhancements you will experience, you simply have to try it and gauge its performance for yourself.  The endpin will tarnishfrom brass tone over time and it can be left to a natural brown patina.  If you want to polish it, recommended is 0000 steel wool, brass or silver polish.  If your current fitting does not fit a 10mm rod, we offer New Harmony Music fittings in both straight bore and 6-degree angle.

    $450.00

  • Stahlhammer Endpin – CF

    The Stahlhammer carbon fiber “bent” endpin consists of a cone 27mm at the widest point which can be cut anywhere along the taper to accommodate a hole as small as 23mm.  There are two telescoping rods.  Loosen the thumb screw and slide out the first rod which will rotate 25 degrees or lock in the straight position.  Then twist the collar to release the second rod and extend to playing length.  We stock medium  10.5 – 18.5″ but can order the Short 9-14.5″ Long 11.75-20.5″.   *Note:  Do not overtighten or the internal nylon locking sleeve may split, requiring replacement.   Read the instructions on the box!!!!

    $275.00

  • 10 mm Hollow Carbon Fiber Endpin (NHM)

    New Harmony Music’s woven carbon fiber endpin is 10mm diameter with hollow center, 20″ long, extremely sharp heat-hardened steel tip which can be resharpened.  The CF weave is visible for a distinctive look, and it’s light at ~43g. If you don’t have calipers to measure the diameter, you can measure around the circumference.  If it’s 1.25″ you have a 10mm endpin.  Each endpin is sold with a plastic-lined rubber cap.  Replacement caps may be purchased separately.      24″ long  endpin is $82.50

    $72.00

  • Frirsz Alloy Tailpiece

    The original  Frirsz cello tailpiece is made of alloy and enhances projection, balance and response.  Wolf tones are tremendously reduced if not eliminated.  Asymmetry allows for a longer vibrating C string.  The cut-away design lightens the tailpiece and opens up the sound of the cello.   Integrated fine tuners are modular, removable, and interchangeable with traditional “keyhole” type of string attachment inserts, so it can be configured to your preferred set-up if you use gut strings or have PegHeds.  Please let us know if you want both the fine tuner modules and keyhole modules.

    $349.00