Bow Case (2 bows) Pedi

$117.00

Pedi tubular bow case holds two cello bows (or viola/violin), zips closed. The adjustable shoulder carry strap can be tightened flat to the exterior. Rigid, well padded, with luggage tag attached, it’s a reliable way to travel or fly with your bows.   Total length is 31″ but we did some specific measuring which you can see in our gallery photo.    Available in black with brown contrasting trim, or brown with black trim.

Category:

Related products

  • Fiedler bow holder with tip pocket

    Fiedler makes a bow holder with a magnetic closure, sticky-back foam block, bow tip pocket, and mounting screws (though users we talked to just used hot glue).   If you wish to add a third bow in the lid that will parallel the fingerboard, this should have the clearance you need.   Keeping in mind case makers do not all use the same materials nor have the same clearances or shell thicknesses, results may vary.  If you are unhappy with your current velcro/snap/zip holders, you can replace them with the Fiedler.

     

    $33.00

  • Bam interior pads

    A six-pack of pads is available to customize fit in any cello hard case. The pads are 3″ x 4″, covered in black fabric with an opening on one side to allow removal or addition of padding as needed. Since the pads are backed with loopy velcro, to be used on a HighTech 4.4 Velcro track, they will not stick to the interior of your case unless you add the soft velcro yourself, either with glue gun or using adhesive-backed Velcro (brand).

    $38.00

  • Vivo Hybrid case with wheels

    Hybrid cello case with wheels weighs 10.2 pounds; shoulder straps add .8 lb.   Shell is textured,  and is shown in Silver and Champagne.  There are 7 overcam latches, none lock.  Neck strap is velcro, scroll loop has an adustable clasp, and bow holders have zip closures. An accessory pocket is in the lid opposite the scroll.  The upper suspension pad supports the neck block, and is on a velcro track so if your cello is long or short, you can adjust the pad.  The lower pads are fixed, suspend under the bottom block, and curve up the lower sides so there are no additional pads required.  Pictured is a 7/8ths cello with dimensions provided, and you can see the fit is fine with no C peg issue.   The largest cello we fit had Back length 763, UB 365 and LB 460 but the widest part is toward the bottom of the cello, so curvature matters.  Two shoulder straps attach to 2 D-rings on the upper back, connecting to D ring at the each lower bout.

    $600.00
  • Sale!

    Bam Classic with wheels

    Bam’s Classic is their most affordable case, having a 1-ply ABS shell compared to their higher-end models with multi-ply shells.   The interior dense, broad padding suspends the cello under its strongest structural  parts: the neck and bottom blocks.  Cellists concerned about wheeling their case will appreciate the material of the wheels and their spacing, as well as the protection the suspension pads provide from vibration and impact.  The Classic features an internal music pocket, but common sense dictates what will fit without interfering with the back of your instrument.  The hardware, carabiners and shoulder straps are top quality, and comfortable whether wearing a tank top or coat.  This case has a generous interior and comfortably fits this cello with back length 30″, upper bouts 14 3/8″, lower bouts 17 5/8″,  Total length from top of scroll to bottom edge 48 1/2″ plus  2 1/4″ for the endpin well.   Weight 13 pounds.   Sale on items in stock:  Gray, Black.

    $875.00